DIY Electric Car Forums banner

Westfalia T3 with Chevy Bolt drivetrain

72644 Views 174 Replies 26 Participants Last post by  remy_martian
VW Vanagon T3 with Chevy Bolt drivetrain

Hi

I'm asking myself if DiyEcar is still the best place to put a build thread and to obtain help.
It was the case many years ago when the overvolted forklift motor was the rule, but now?

Well, my plan is to put a 200 hp 60 kWh Bolt drivetrain in a Westfalia... Exciting right?
Yes, but all the electronic and control in the Bolt fear me a bit.
Anyway, I will have the crached Bolt in few days and the West in few weeks.

Let me know if you have advice or help.
Thanks

Attachments

See less See more
2
1 - 1 of 175 Posts
Nice EV conversion! I wanted to do a Jeep EV conversion but I always wanted to have a Westfaila. I’m not sure where I can buy a damaged chevy bolt in Quebec and I don’t know how it works to legally put an EV conversion car on the road with the right insurance, but I’ll find out.
1 - 1 of 175 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top