DIY Electric Car Forums banner
1 - 1 of 1 Posts

·
Registered
Custom two seat
Joined
·
2 Posts
Discussion Starter · #1 ·
Hello, I posted a request for information on the best way to connect 16 G1 GBS type cell modules to FOUR LFMP40AH GBS batteries and the top and bottom isolators. All of this came to me from Electricmotorsport as a kit but all of the information supplied with the kit is for the NON G1 cell modules. I hope to contact someone who will look at the attached photo of the batteries in the battery box. My questions are, is the configuration of the batteries correct for optimum performance, Or do I need to reconfigure the orientation of the batteries before I continue. IF you look at the photo I have drawn a green line where I thought I would connect the top and bottom daisy chain. Would that work or do I have to follow the Cell Module and jumper path? Thank you for any suggestions. I also need a schematic that would show all wires and connections to make my battery box a working 48 volt BMS EMUS system.
Light Orange Automotive tire Red Font
 
1 - 1 of 1 Posts
Top